Junling Hu

Hu_Junling_2014Associate Professor, Chair, Mechanical Engineering, School of Engineering

Office Location: Engineering – Technology Bldg – Office 130
Telephone: (203) 576-4757
Email: jjhu@bridgeport.edu
Personal Website: Visit Website

 

 

 

 

 

Ph.D. in Mechanical Engineering, Missouri University of Science and Technology, 2005
M.E. in Thermal Engineering, Huazhong University of Science & Technology, 1999
B.E. in Thermal Engineering, Huazhong University of Science & Technology, 1996

Dr. Junling (Joyce) Hu came to the University of Bridgeport in 2005 from the Missouri University of Science and Technology. Her research has been focused on solving problems that involve transport of heat, mass and momentum and thermal stresses in a wide range of applications, including manufacturing and materials processing, fuel cell design, thermal management of electronics, wellbore circulation in drilling operation, and vehicle aerodynamics. Her work on multiphysics modeling and simulation of gas metal arc welding process and laser welding process has been published in prestigious journals and conferences. She is the Director of the Applied Computational Fluid Dynamics (CFD) Laboratory at UB. She has also established a Computer Aided Engineering (CAE) and Rapid Prototyping Laboratory which enables research on reverse engineering and engineering analysis using commercial CAE tools, including CFD, finite element analysis (FEA), multibody dynamics (BMD), and optimization.


MEEG 453 Finite Element Method in Mechanical Engineering

MEEG 452 Advanced Vibrations

MEEG 429 Electronics Cooling

MEEG 512 Computational Fluid Dynamics

MEEG 505 Welding Engineering

MEEG 426 Materials Selection for Mechanical Engineers

MEEG 223 Material Science for Engineers


Transport phenomena in manufacturing and materials processing, Thermal Management of Electronic Devices and Systems, Renewable Energy Systems, Modeling Fluid Flow and Heat Transfer inside Wellbore during Drilling Operation, Micro-/Nano- Scale Energy Transport, Computational Fluid Dynamics, Finite Element Analysis, Multiphisics Modeling and Simulation, Multiphase flow, Fluid-Structure Interaction, Gas Metal Arc Welding, Laser-Based Manufacturing and Materials Processing Welding, Cutting, Drilling, Cladding


G. Xu, J. Hu and H. L. Tsai, “Modeling 3D Plasma Arc in Gas Tungsten Arc Welding”, ASME Journal of Manufacturing Science and Engineering, 134 (2012) 031001 (13 pages) (Top 10 Most Downloaded Articles in May 2012).

H. Guo, J. Hu and H. L. Tsai, “Three-Dimensional Modeling of Gas Metal Arc Welding of Aluminum Alloys”, ASME Journal of Manufacturing Science and Engineering, 132 (2010) 021011 (10 pages). (Top 10 Most Downloaded Articles in May 2010).

G. Xu, J. Hu and H. L. Tsai, “Three-dimensional modeling of arc plasma and metal transfer in gas metal arc welding”, International Journal of Heat and Mass Transfer, 52 (2009) 1709-1724.

G. Xu, J. Hu and H. L. Tsai, “Three-Dimensional Modeling of the Plasma Arc in Arc Welding”, Journal of Applied Physics, 104, 103301 (2008) (9 pages).

J. Hu and H. L. Tsai, “Modeling of Transport Phenomena in 3D GMAW of Thick Metal with V-Groove”, Journal of Physics D: Applied Physics, 41 (2008) 065202 (10pp).

J. Hu, H. Guo and H. L. Tsai, “Weld Pool Dynamics and the Formation of Ripples in 3D Gas Metal Arc Welding”, International Journal of Heat and Mass Transfer, 51 (2008), 2537-2552.

J. Hu and H. L. Tsai, “Metal Transfer and Arc Plasma in Gas Metal Arc Welding”, ASME Journal of Heat Transfer, 129 (2007) 1025-1035.

J. Hu and H. L. Tsai, “Heat and Mass Transfer in Gas Metal Arc Welding, Part I: the Arc”, International Journal of Heat and Mass Transfer, 50 (2007), 833-846.

J. Hu and H. L. Tsai, “Heat and Mass Transfer in Gas Metal Arc Welding, Part II: the Metal”, International Journal of Heat and Mass Transfer, 50 (2007), 808-820.

J. Hu and H. L. Tsai, “Effects of Welding Current on Droplet Generation and Arc Plasma in Gas Metal Arc Welding”, Journal of Applied Physics, 100, 053304 (2006).


Dr. Hu is a member of ASME, ASEE, and AWS.

Excellent Reviewer for Metallurgical and Materials Transactions, 2012

Advanced Communicator Bronze, Toastmasters International, 2006


J.Hu, M. Faezipour and N. Gupta, “Engaging Students: Everyday Examples in Engineering (E3s)” Mini-Grant Application, NSF ENGAGE, $2,000, March 2013 to March 2014, funded.

J. Hu, “Numerical Modeling of Temperature Profiles in Drilling Wells – Phase II”, Pegasus Vertex, Inc., $5,741, December 2011 to May 2012, funded.

J. Pallis and J. Hu, “Multiphysics Modeling of Gas Tungsten Arc Welding”, CT Space Grant College Consortium, $6,000 and $9,707 UB Matching Fund, June 2011 to May 2012, funded.

J. Hu, “Numerical Modeling of Temperature Profiles in Drilling Wells”, Pegasus Vertex, Inc., $20,001, July 2010 to December 2010, funded.

J. Hu and H.L. Tsai, “Modeling Transport Phenomena and Shielding Gas Effects in Gas Metal Arc Welding”, University of Bridgeport Seed Grant, Office of Sponsored Research at UB, $7,000, January 2009 to December 2009, funded.

J. Hu, “CFD Validation and Simulation of Airfoil Characteristics”, CT Space Grant College Consortium, $6,000 and $12,000 in UB Matching Funds, January 2008 to December 2008, funded.

J. Hu, NSF-TRUST Women’s Institute in Summer Enrichment (WISE) fellowship, $2,500, 2006, funded.

J. Hu, travel grant to NSF TRUST WISE summer program, $1,000, 2006, funded.

J. Hu, travel grant to Integration of Simulation Technology into the Engineering Curriculum (ISTEC) 2008 Conference, Cornell University, $1,393, July 2008, funded.

J. Hu, Travel grant, invited seminar, Pegasus Vertex, Inc., $696, December 2010, funded